/[pcsx2_0.9.7]/trunk/3rdparty/wxWidgets/include/wx/msw/setup.h
ViewVC logotype

Contents of /trunk/3rdparty/wxWidgets/include/wx/msw/setup.h

Parent Directory Parent Directory | Revision Log Revision Log


Revision 31 - (show annotations) (download)
Tue Sep 7 03:24:11 2010 UTC (9 years, 10 months ago) by william
File MIME type: text/plain
File size: 44773 byte(s)
committing r3113 initial commit again...
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/msw/setup.h
3 // Purpose: Configuration for the library
4 // Author: Julian Smart
5 // Modified by:
6 // Created: 01/02/97
7 // RCS-ID: $Id: setup0.h 51451 2008-01-29 23:11:55Z VZ $
8 // Copyright: (c) Julian Smart
9 // Licence: wxWindows licence
10 /////////////////////////////////////////////////////////////////////////////
11
12 #ifndef _WX_SETUP_H_
13 #define _WX_SETUP_H_
14
15 /* --- start common options --- */
16 // ----------------------------------------------------------------------------
17 // global settings
18 // ----------------------------------------------------------------------------
19
20 // define this to 0 when building wxBase library - this can also be done from
21 // makefile/project file overriding the value here
22 #ifndef wxUSE_GUI
23 #define wxUSE_GUI 1
24 #endif // wxUSE_GUI
25
26 // ----------------------------------------------------------------------------
27 // compatibility settings
28 // ----------------------------------------------------------------------------
29
30 // This setting determines the compatibility with 2.4 API: set it to 1 to
31 // enable it but please consider updating your code instead.
32 //
33 // Default is 0
34 //
35 // Recommended setting: 0 (please update your code)
36 #define WXWIN_COMPATIBILITY_2_4 0
37
38 // This setting determines the compatibility with 2.6 API: set it to 0 to
39 // flag all cases of using deprecated functions.
40 //
41 // Default is 1 but please try building your code with 0 as the default will
42 // change to 0 in the next version and the deprecated functions will disappear
43 // in the version after it completely.
44 //
45 // Recommended setting: 0 (please update your code)
46 #define WXWIN_COMPATIBILITY_2_6 1
47
48 // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
49 // default system font is used for wxWindow::GetCharWidth/Height() instead of
50 // the current font.
51 //
52 // Default is 0
53 //
54 // Recommended setting: 0
55 #define wxDIALOG_UNIT_COMPATIBILITY 0
56
57 // ----------------------------------------------------------------------------
58 // debugging settings
59 // ----------------------------------------------------------------------------
60
61 // Generic comment about debugging settings: they are very useful if you don't
62 // use any other memory leak detection tools such as Purify/BoundsChecker, but
63 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
64 // as wxWidgets memory debugging subsystem built in since version 5.0 and you
65 // may prefer to use it instead of built in memory debugging code because it is
66 // faster and more fool proof.
67 //
68 // Using VC++ CRT memory debugging is enabled by default in debug mode
69 // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
70 // and if __NO_VC_CRTDBG__ is not defined.
71
72 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
73 // __WXDEBUG__ is not defined, will still use the normal memory operators.
74 //
75 // Default is 0
76 //
77 // Recommended setting: 0
78 #define wxUSE_DEBUG_CONTEXT 0
79
80 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
81 // __WXDEBUG__ is also defined.
82 //
83 // WARNING: this code may not work with all architectures, especially if
84 // alignment is an issue. This switch is currently ignored for mingw / cygwin
85 //
86 // Default is 0
87 //
88 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
89 #define wxUSE_MEMORY_TRACING 0
90
91 // In debug mode, cause new and delete to be redefined globally.
92 // If this causes problems (e.g. link errors which is a common problem
93 // especially if you use another library which also redefines the global new
94 // and delete), set this to 0.
95 // This switch is currently ignored for mingw / cygwin
96 //
97 // Default is 0
98 //
99 // Recommended setting: 0
100 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
101
102 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
103 // this causes problems (e.g. link errors), set this to 0. You may need to set
104 // this to 0 if using templates (at least for VC++). This switch is currently
105 // ignored for mingw / cygwin / CodeWarrior
106 //
107 // Default is 0
108 //
109 // Recommended setting: 0
110 #define wxUSE_DEBUG_NEW_ALWAYS 0
111
112 // wxHandleFatalExceptions() may be used to catch the program faults at run
113 // time and, instead of terminating the program with a usual GPF message box,
114 // call the user-defined wxApp::OnFatalException() function. If you set
115 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
116 //
117 // This setting is for Win32 only and can only be enabled if your compiler
118 // supports Win32 structured exception handling (currently only VC++ does)
119 //
120 // Default is 1
121 //
122 // Recommended setting: 1 if your compiler supports it.
123 #define wxUSE_ON_FATAL_EXCEPTION 1
124
125 // Set this to 1 to be able to generate a human-readable (unlike
126 // machine-readable minidump created by wxCrashReport::Generate()) stack back
127 // trace when your program crashes using wxStackWalker
128 //
129 // Default is 1 if supported by the compiler.
130 //
131 // Recommended setting: 1, set to 0 if your programs never crash
132 #define wxUSE_STACKWALKER 1
133
134 // Set this to 1 to compile in wxDebugReport class which allows you to create
135 // and optionally upload to your web site a debug report consisting of back
136 // trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
137 //
138 // Default is 1 if supported by the compiler.
139 //
140 // Recommended setting: 1, it is compiled into a separate library so there
141 // is no overhead if you don't use it
142 #define wxUSE_DEBUGREPORT 1
143
144 // ----------------------------------------------------------------------------
145 // Unicode support
146 // ----------------------------------------------------------------------------
147
148 // Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
149 // defined as wchar_t, wxString will use Unicode internally. If you set this
150 // to 1, you must use wxT() macro for all literal strings in the program.
151 //
152 // Unicode is currently only fully supported under Windows NT/2000/XP
153 // (Windows 9x doesn't support it and the programs compiled in Unicode mode
154 // will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
155 //
156 // Default is 0
157 //
158 // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
159 #ifndef wxUSE_UNICODE
160 #define wxUSE_UNICODE 0
161 #endif
162
163 // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
164 // compiling the program in Unicode mode. More precisely, it will be possible
165 // to construct wxString from a wide (Unicode) string and convert any wxString
166 // to Unicode.
167 //
168 // Default is 1
169 //
170 // Recommended setting: 1
171 #define wxUSE_WCHAR_T 1
172
173 // ----------------------------------------------------------------------------
174 // global features
175 // ----------------------------------------------------------------------------
176
177 // Compile library in exception-safe mode? If set to 1, the library will try to
178 // behave correctly in presence of exceptions (even though it still will not
179 // use the exceptions itself) and notify the user code about any unhandled
180 // exceptions. If set to 0, propagation of the exceptions through the library
181 // code will lead to undefined behaviour -- but the code itself will be
182 // slightly smaller and faster.
183 //
184 // Note that like wxUSE_THREADS this option is automatically set to 0 if
185 // wxNO_EXCEPTIONS is defined.
186 //
187 // Default is 1
188 //
189 // Recommended setting: depends on whether you intend to use C++ exceptions
190 // in your own code (1 if you do, 0 if you don't)
191 #define wxUSE_EXCEPTIONS 1
192
193 // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
194 //
195 // Default is 0
196 //
197 // Recommended setting: 0 (this is still work in progress...)
198 #define wxUSE_EXTENDED_RTTI 0
199
200 // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
201 // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
202 // and for wxHashMap to be implemented with templates.
203 //
204 // Default is 0
205 //
206 // Recommended setting: YMMV
207 #define wxUSE_STL 1
208
209 // Support for message/error logging. This includes wxLogXXX() functions and
210 // wxLog and derived classes. Don't set this to 0 unless you really know what
211 // you are doing.
212 //
213 // Default is 1
214 //
215 // Recommended setting: 1 (always)
216 #define wxUSE_LOG 1
217
218 // Recommended setting: 1
219 #define wxUSE_LOGWINDOW 1
220
221 // Recommended setting: 1
222 #define wxUSE_LOGGUI 1
223
224 // Recommended setting: 1
225 #define wxUSE_LOG_DIALOG 1
226
227 // Support for command line parsing using wxCmdLineParser class.
228 //
229 // Default is 1
230 //
231 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
232 #define wxUSE_CMDLINE_PARSER 1
233
234 // Support for multithreaded applications: if 1, compile in thread classes
235 // (thread.h) and make the library a bit more thread safe. Although thread
236 // support is quite stable by now, you may still consider recompiling the
237 // library without it if you have no use for it - this will result in a
238 // somewhat smaller and faster operation.
239 //
240 // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
241 // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
242 // build/msw/config.* file this value will have no effect.
243 //
244 // Default is 1
245 //
246 // Recommended setting: 0 unless you do plan to develop MT applications
247 #define wxUSE_THREADS 1
248
249 // If enabled, compiles wxWidgets streams classes
250 //
251 // wx stream classes are used for image IO, process IO redirection, network
252 // protocols implementation and much more and so disabling this results in a
253 // lot of other functionality being lost.
254 //
255 // Default is 1
256 //
257 // Recommended setting: 1 as setting it to 0 disables many other things
258 #define wxUSE_STREAMS 1
259
260 // Use standard C++ streams if 1 instead of wx streams in some places. If
261 // disabled (default), wx streams are used everywhere and wxWidgets doesn't
262 // depend on the standard streams library.
263 //
264 // Notice that enabling this does not replace wx streams with std streams
265 // everywhere, in a lot of places wx streams are used no matter what.
266 //
267 // Default is 0
268 //
269 // Recommended setting: 1 if you use the standard streams anyhow and so
270 // dependency on the standard streams library is not a
271 // problem
272 #define wxUSE_STD_IOSTREAM 0
273
274 // Enable conversion to standard C++ string if 1.
275 //
276 // Default is 1 for most compilers.
277 //
278 // Currently the Digital Mars and Watcom compilers come without standard C++
279 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
280 // them (e.g. from STLPort).
281 //
282 // VC++ 5.0 does include standard C++ library header, however they produce
283 // many warnings that can't be turned off when compiled at warning level 4.
284 #if defined(__DMC__) || defined(__WATCOMC__) \
285 || (defined(_MSC_VER) && _MSC_VER < 1200)
286 #define wxUSE_STD_STRING 0
287 #else
288 #define wxUSE_STD_STRING 1
289 #endif
290
291 // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
292 // Note that if the system's implementation does not support positional
293 // parameters, setting this to 1 forces the use of the wxWidgets implementation
294 // of wxVsnprintf. The standard vsnprintf() supports positional parameters on
295 // many Unix systems but usually doesn't under Windows.
296 //
297 // Positional parameters are very useful when translating a program since using
298 // them in formatting strings allow translators to correctly reorder the
299 // translated sentences.
300 //
301 // Default is 1
302 //
303 // Recommended setting: 1 if you want to support multiple languages
304 #define wxUSE_PRINTF_POS_PARAMS 1
305
306 // ----------------------------------------------------------------------------
307 // non GUI features selection
308 // ----------------------------------------------------------------------------
309
310 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
311 // integer which is implemented in terms of native 64 bit integers if any or
312 // uses emulation otherwise.
313 //
314 // This class is required by wxDateTime and so you should enable it if you want
315 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
316 // integers in which case (almost) all of its functions are inline and it
317 // almost does not take any space, so there should be no reason to switch it
318 // off.
319 //
320 // Recommended setting: 1
321 #define wxUSE_LONGLONG 1
322
323 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
324 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
325 //
326 // Default is 1
327 //
328 // Recommended setting: 1 (wxFile is highly recommended as it is required by
329 // i18n code, wxFileConfig and others)
330 #define wxUSE_FILE 1
331 #define wxUSE_FFILE 1
332
333 // Use wxFSVolume class providing access to the configured/active mount points
334 //
335 // Default is 1
336 //
337 // Recommended setting: 1 (but may be safely disabled if you don't use it)
338 #define wxUSE_FSVOLUME 1
339
340 // Use wxStandardPaths class which allows to retrieve some standard locations
341 // in the file system
342 //
343 // Default is 1
344 //
345 // Recommended setting: 1 (may be disabled to save space, but not much)
346 #define wxUSE_STDPATHS 1
347
348 // use wxTextBuffer class: required by wxTextFile
349 #define wxUSE_TEXTBUFFER 1
350
351 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
352 // wxFileConfig
353 #define wxUSE_TEXTFILE 1
354
355 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
356 #define wxUSE_INTL 1
357
358 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
359 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
360 // old wxTime and wxDate classes which are still provided for backwards
361 // compatibility (and implemented in terms of wxDateTime).
362 //
363 // Note that this class is relatively new and is still officially in alpha
364 // stage because some features are not yet (fully) implemented. It is already
365 // quite useful though and should only be disabled if you are aiming at
366 // absolutely minimal version of the library.
367 //
368 // Requires: wxUSE_LONGLONG
369 //
370 // Default is 1
371 //
372 // Recommended setting: 1
373 #define wxUSE_DATETIME 1
374
375 // Set wxUSE_TIMER to 1 to compile wxTimer class
376 //
377 // Default is 1
378 //
379 // Recommended setting: 1
380 #define wxUSE_TIMER 1
381
382 // Use wxStopWatch clas.
383 //
384 // Default is 1
385 //
386 // Recommended setting: 1 (needed by wxSocket)
387 #define wxUSE_STOPWATCH 1
388
389 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
390 // which allow the application to store its settings in the persistent
391 // storage. Setting this to 1 will also enable on-demand creation of the
392 // global config object in wxApp.
393 //
394 // See also wxUSE_CONFIG_NATIVE below.
395 //
396 // Recommended setting: 1
397 #define wxUSE_CONFIG 1
398
399 // If wxUSE_CONFIG is 1, you may choose to use either the native config
400 // classes under Windows (using .INI files under Win16 and the registry under
401 // Win32) or the portable text file format used by the config classes under
402 // Unix.
403 //
404 // Default is 1 to use native classes. Note that you may still use
405 // wxFileConfig even if you set this to 1 - just the config object created by
406 // default for the applications needs will be a wxRegConfig or wxIniConfig and
407 // not wxFileConfig.
408 //
409 // Recommended setting: 1
410 #define wxUSE_CONFIG_NATIVE 1
411
412 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
413 // to connect/disconnect from the network and be notified whenever the dial-up
414 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
415 //
416 // Default is 1.
417 //
418 // Recommended setting: 1
419 #define wxUSE_DIALUP_MANAGER 0
420
421 // Compile in classes for run-time DLL loading and function calling.
422 // Required by wxUSE_DIALUP_MANAGER.
423 //
424 // This setting is for Win32 only
425 //
426 // Default is 1.
427 //
428 // Recommended setting: 1
429 #define wxUSE_DYNLIB_CLASS 1
430
431 // experimental, don't use for now
432 #define wxUSE_DYNAMIC_LOADER 0
433
434 // Set to 1 to use socket classes
435 #define wxUSE_SOCKETS 1
436
437 // Set to 1 to enable virtual file systems (required by wxHTML)
438 #define wxUSE_FILESYSTEM 1
439
440 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
441 #define wxUSE_FS_ZIP 1
442
443 // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
444 #define wxUSE_FS_ARCHIVE 1
445
446 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
447 #define wxUSE_FS_INET 1
448
449 // wxArchive classes for accessing archives such as zip and tar
450 #define wxUSE_ARCHIVE_STREAMS 1
451
452 // Set to 1 to compile wxZipInput/OutputStream classes.
453 #define wxUSE_ZIPSTREAM 1
454
455 // Set to 1 to compile wxTarInput/OutputStream classes.
456 #define wxUSE_TARSTREAM 1
457
458 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
459 // wxUSE_LIBPNG
460 #define wxUSE_ZLIB 1
461
462 // If enabled, the code written by Apple will be used to write, in a portable
463 // way, float on the disk. See extended.c for the license which is different
464 // from wxWidgets one.
465 //
466 // Default is 1.
467 //
468 // Recommended setting: 1 unless you don't like the license terms (unlikely)
469 #define wxUSE_APPLE_IEEE 1
470
471 // Joystick support class
472 #define wxUSE_JOYSTICK 1
473
474 // wxFontMapper class
475 #define wxUSE_FONTMAP 1
476
477 // wxMimeTypesManager class
478 #define wxUSE_MIMETYPE 1
479
480 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
481 // or wxURL you need to set this to 1.
482 //
483 // Default is 1.
484 //
485 // Recommended setting: 1
486 #define wxUSE_PROTOCOL 1
487
488 // The settings for the individual URL schemes
489 #define wxUSE_PROTOCOL_FILE 1
490 #define wxUSE_PROTOCOL_FTP 1
491 #define wxUSE_PROTOCOL_HTTP 1
492
493 // Define this to use wxURL class.
494 #define wxUSE_URL 1
495
496 // Define this to use native platform url and protocol support.
497 // Currently valid only for MS-Windows.
498 // Note: if you set this to 1, you can open ftp/http/gopher sites
499 // and obtain a valid input stream for these sites
500 // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
501 // Doing so reduces the code size.
502 //
503 // This code is experimental and subject to change.
504 #define wxUSE_URL_NATIVE 0
505
506 // Support for wxVariant class used in several places throughout the library,
507 // notably in wxDataViewCtrl API.
508 //
509 // Default is 1.
510 //
511 // Recommended setting: 1 unless you want to reduce the library size as much as
512 // possible in which case setting this to 0 can gain up to 100KB.
513 #define wxUSE_VARIANT 1
514
515 // Support for regular expression matching via wxRegEx class: enable this to
516 // use POSIX regular expressions in your code. You need to compile regex
517 // library from src/regex to use it under Windows.
518 //
519 // Default is 0
520 //
521 // Recommended setting: 1 if your compiler supports it, if it doesn't please
522 // contribute us a makefile for src/regex for it
523 #define wxUSE_REGEX 1
524
525 // wxSystemOptions class
526 #define wxUSE_SYSTEM_OPTIONS 1
527
528 // wxSound class
529 #define wxUSE_SOUND 0
530
531 // Use wxMediaCtrl
532 //
533 // Default is 1.
534 //
535 // Recommended setting: 1
536 #define wxUSE_MEDIACTRL 1
537
538 // Use GStreamer for Unix (req a lot of dependancies)
539 //
540 // Default is 0
541 //
542 // Recommended setting: 1 (wxMediaCtrl won't work by default without it)
543 #define wxUSE_GSTREAMER 0
544
545 // Use wxWidget's XRC XML-based resource system. Recommended.
546 //
547 // Default is 1
548 //
549 // Recommended setting: 1 (requires wxUSE_XML)
550 #define wxUSE_XRC 0
551
552 // XML parsing classes. Note that their API will change in the future, so
553 // using wxXmlDocument and wxXmlNode in your app is not recommended.
554 //
555 // Default is the same as wxUSE_XRC, i.e. 1 by default.
556 //
557 // Recommended setting: 1 (required by XRC)
558 #define wxUSE_XML wxUSE_XRC
559
560 // Use wxWidget's AUI docking system
561 //
562 // Default is 1
563 //
564 // Recommended setting: 1
565 #define wxUSE_AUI 1
566
567
568 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
569 // 2D drawing API. (Still somewhat experimental)
570 //
571 // Please note that on Windows you will need to link with gdiplus.lib (use
572 // USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
573 // application if you want it to be runnable on pre-XP systems.
574 //
575 // Default is 0
576 //
577 // Recommended setting: 1
578 #ifndef wxUSE_GRAPHICS_CONTEXT
579 #define wxUSE_GRAPHICS_CONTEXT 0
580 #endif
581
582 // ----------------------------------------------------------------------------
583 // Individual GUI controls
584 // ----------------------------------------------------------------------------
585
586 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
587 // (without it, wxControl class is not compiled)
588 //
589 // Default is 1
590 //
591 // Recommended setting: 1 (don't change except for very special programs)
592 #define wxUSE_CONTROLS 1
593
594 // wxPopupWindow class is a top level transient window. It is currently used
595 // to implement wxTipWindow
596 //
597 // Default is 1
598 //
599 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
600 #define wxUSE_POPUPWIN 1
601
602 // wxTipWindow allows to implement the custom tooltips, it is used by the
603 // context help classes. Requires wxUSE_POPUPWIN.
604 //
605 // Default is 1
606 //
607 // Recommended setting: 1 (may be set to 0)
608 #define wxUSE_TIPWINDOW 1
609
610 // Each of the settings below corresponds to one wxWidgets control. They are
611 // all switched on by default but may be disabled if you are sure that your
612 // program (including any standard dialogs it can show!) doesn't need them and
613 // if you desperately want to save some space. If you use any of these you must
614 // set wxUSE_CONTROLS as well.
615 //
616 // Default is 1
617 //
618 // Recommended setting: 1
619 #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
620 #define wxUSE_BUTTON 1 // wxButton
621 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
622 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
623 #define wxUSE_CHECKBOX 1 // wxCheckBox
624 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
625 #define wxUSE_CHOICE 1 // wxChoice
626 #define wxUSE_COLLPANE 1 // wxCollapsiblePane
627 #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
628 #define wxUSE_COMBOBOX 1 // wxComboBox
629 #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
630 #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
631 #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
632 #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
633 #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
634 #define wxUSE_GAUGE 1 // wxGauge
635 #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
636 #define wxUSE_LISTBOX 1 // wxListBox
637 #define wxUSE_LISTCTRL 1 // wxListCtrl
638 #define wxUSE_RADIOBOX 1 // wxRadioBox
639 #define wxUSE_RADIOBTN 1 // wxRadioButton
640 #define wxUSE_SCROLLBAR 1 // wxScrollBar
641 #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
642 #define wxUSE_SLIDER 1 // wxSlider
643 #define wxUSE_SPINBTN 1 // wxSpinButton
644 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
645 #define wxUSE_STATBOX 1 // wxStaticBox
646 #define wxUSE_STATLINE 1 // wxStaticLine
647 #define wxUSE_STATTEXT 1 // wxStaticText
648 #define wxUSE_STATBMP 1 // wxStaticBitmap
649 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
650 #define wxUSE_TOGGLEBTN 1 // requires wxButton
651 #define wxUSE_TREECTRL 1 // wxTreeCtrl
652
653 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
654 // below either wxStatusBar95 or a generic wxStatusBar will be used.
655 //
656 // Default is 1
657 //
658 // Recommended setting: 1
659 #define wxUSE_STATUSBAR 1
660
661 // Two status bar implementations are available under Win32: the generic one
662 // or the wrapper around native control. For native look and feel the native
663 // version should be used.
664 //
665 // Default is 1 for the platforms where native status bar is supported.
666 //
667 // Recommended setting: 1 (there is no advantage in using the generic one)
668 #define wxUSE_NATIVE_STATUSBAR 1
669
670 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
671 // classes at all. Otherwise, use the native toolbar class unless
672 // wxUSE_TOOLBAR_NATIVE is 0.
673 //
674 // Default is 1 for all settings.
675 //
676 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
677 #define wxUSE_TOOLBAR 1
678 #define wxUSE_TOOLBAR_NATIVE 1
679
680 // wxNotebook is a control with several "tabs" located on one of its sides. It
681 // may be used to logically organise the data presented to the user instead of
682 // putting everything in one huge dialog. It replaces wxTabControl and related
683 // classes of wxWin 1.6x.
684 //
685 // Default is 1.
686 //
687 // Recommended setting: 1
688 #define wxUSE_NOTEBOOK 1
689
690 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
691 // the tabs
692 //
693 // Default is 1.
694 //
695 // Recommended setting: 1
696 #define wxUSE_LISTBOOK 1
697
698 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
699 // the tabs
700 //
701 // Default is 1.
702 //
703 // Recommended setting: 1
704 #define wxUSE_CHOICEBOOK 1
705
706 // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
707 // the tabs
708 //
709 // Default is 1.
710 //
711 // Recommended setting: 1
712 #define wxUSE_TREEBOOK 1
713
714 // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
715 // tabs
716 //
717 // Default is 1.
718 //
719 // Recommended setting: 1
720 #define wxUSE_TOOLBOOK 1
721
722 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
723 // the new class. It shouldn't be used in new code.
724 //
725 // Default is 0.
726 //
727 // Recommended setting: 0 (use wxNotebook)
728 #define wxUSE_TAB_DIALOG 0
729
730 // wxGrid class
731 //
732 // Default is 1, set to 0 to cut down compilation time and binaries size if you
733 // don't use it.
734 //
735 // Recommended setting: 1
736 //
737 #define wxUSE_GRID 1
738
739 // wxMiniFrame class: a frame with narrow title bar
740 //
741 // Default is 1.
742 //
743 // Recommended setting: 1 (it doesn't cost almost anything)
744 #define wxUSE_MINIFRAME 1
745
746 // wxComboCtrl and related classes: combobox with custom popup window and
747 // not necessarily a listbox.
748 //
749 // Default is 1.
750 //
751 // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
752 // it used by wxComboBox
753 #define wxUSE_COMBOCTRL 1
754
755 // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
756 // items.
757 //
758 // Default is 1.
759 //
760 // Recommended setting: 1 but can be safely set to 0, except where it is
761 // needed as a base class for generic wxBitmapComboBox.
762 #define wxUSE_ODCOMBOBOX 1
763
764 // wxBitmapComboBox is a combobox that can have images in front of text items.
765 //
766 // Default is 1.
767 //
768 // Recommended setting: 1 but can be safely set to 0
769 #define wxUSE_BITMAPCOMBOBOX 1
770
771 // ----------------------------------------------------------------------------
772 // Miscellaneous GUI stuff
773 // ----------------------------------------------------------------------------
774
775 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
776 #define wxUSE_ACCEL 1
777
778 // Hotkey support (currently Windows only)
779 #define wxUSE_HOTKEY 1
780
781 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
782 // under Windows).
783 //
784 // Default is 1.
785 //
786 // Recommended setting: 1 (can be safely set to 0, not used by the library)
787 #define wxUSE_CARET 1
788
789 // Use wxDisplay class: it allows enumerating all displays on a system and
790 // their geometries as well as finding the display on which the given point or
791 // window lies.
792 //
793 // Default is 1.
794 //
795 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
796 #define wxUSE_DISPLAY 1
797
798 // Miscellaneous geometry code: needed for Canvas library
799 #define wxUSE_GEOMETRY 1
800
801 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
802 // wxListCtrl.
803 //
804 // Default is 1.
805 //
806 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
807 // enumerated above, then this class is mostly useless too)
808 #define wxUSE_IMAGLIST 1
809
810 // Use wxMenu, wxMenuBar, wxMenuItem.
811 //
812 // Default is 1.
813 //
814 // Recommended setting: 1 (can't be disabled under MSW)
815 #define wxUSE_MENUS 1
816
817 // Use wxSashWindow class.
818 //
819 // Default is 1.
820 //
821 // Recommended setting: 1
822 #define wxUSE_SASH 1
823
824 // Use wxSplitterWindow class.
825 //
826 // Default is 1.
827 //
828 // Recommended setting: 1
829 #define wxUSE_SPLITTER 1
830
831 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
832 //
833 // Default is 1.
834 //
835 // Recommended setting: 1
836 #define wxUSE_TOOLTIPS 1
837
838 // wxValidator class and related methods
839 #define wxUSE_VALIDATORS 1
840
841 // ----------------------------------------------------------------------------
842 // common dialogs
843 // ----------------------------------------------------------------------------
844
845 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
846 // file selector, printer dialog). Switching this off also switches off the
847 // printing architecture and interactive wxPrinterDC.
848 //
849 // Default is 1
850 //
851 // Recommended setting: 1 (unless it really doesn't work)
852 #define wxUSE_COMMON_DIALOGS 1
853
854 // wxBusyInfo displays window with message when app is busy. Works in same way
855 // as wxBusyCursor
856 #define wxUSE_BUSYINFO 1
857
858 // Use single/multiple choice dialogs.
859 //
860 // Default is 1
861 //
862 // Recommended setting: 1 (used in the library itself)
863 #define wxUSE_CHOICEDLG 1
864
865 // Use colour picker dialog
866 //
867 // Default is 1
868 //
869 // Recommended setting: 1
870 #define wxUSE_COLOURDLG 1
871
872 // wxDirDlg class for getting a directory name from user
873 #define wxUSE_DIRDLG 1
874
875 // TODO: setting to choose the generic or native one
876
877 // Use file open/save dialogs.
878 //
879 // Default is 1
880 //
881 // Recommended setting: 1 (used in many places in the library itself)
882 #define wxUSE_FILEDLG 1
883
884 // Use find/replace dialogs.
885 //
886 // Default is 1
887 //
888 // Recommended setting: 1 (but may be safely set to 0)
889 #define wxUSE_FINDREPLDLG 1
890
891 // Use font picker dialog
892 //
893 // Default is 1
894 //
895 // Recommended setting: 1 (used in the library itself)
896 #define wxUSE_FONTDLG 1
897
898 // Use wxMessageDialog and wxMessageBox.
899 //
900 // Default is 1
901 //
902 // Recommended setting: 1 (used in the library itself)
903 #define wxUSE_MSGDLG 1
904
905 // progress dialog class for lengthy operations
906 #define wxUSE_PROGRESSDLG 1
907
908 // support for startup tips (wxShowTip &c)
909 #define wxUSE_STARTUP_TIPS 1
910
911 // text entry dialog and wxGetTextFromUser function
912 #define wxUSE_TEXTDLG 1
913
914 // number entry dialog
915 #define wxUSE_NUMBERDLG 1
916
917 // splash screen class
918 #define wxUSE_SPLASH 1
919
920 // wizards
921 #define wxUSE_WIZARDDLG 1
922
923 // Compile in wxAboutBox() function showing the standard "About" dialog.
924 //
925 // Default is 1
926 //
927 // Recommended setting: 1 but can be set to 0 to save some space if you don't
928 // use this function
929 #define wxUSE_ABOUTDLG 1
930
931 // ----------------------------------------------------------------------------
932 // Metafiles support
933 // ----------------------------------------------------------------------------
934
935 // Windows supports the graphics format known as metafile which is, though not
936 // portable, is widely used under Windows and so is supported by wxWin (under
937 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
938 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
939 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
940 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
941 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
942 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
943 // in any metafile related classes at all.
944 //
945 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
946 //
947 // Recommended setting: default or 0 for everything for portable programs.
948 #define wxUSE_METAFILE 1
949 #define wxUSE_ENH_METAFILE 1
950 #define wxUSE_WIN_METAFILES_ALWAYS 0
951
952 // ----------------------------------------------------------------------------
953 // Big GUI components
954 // ----------------------------------------------------------------------------
955
956 // Set to 0 to disable MDI support.
957 //
958 // Requires wxUSE_NOTEBOOK under platforms other than MSW.
959 //
960 // Default is 1.
961 //
962 // Recommended setting: 1, can be safely set to 0.
963 #define wxUSE_MDI 1
964
965 // Set to 0 to disable document/view architecture
966 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
967
968 // Set to 0 to disable MDI document/view architecture
969 //
970 // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
971 #define wxUSE_MDI_ARCHITECTURE 1
972
973 // Set to 0 to disable print/preview architecture code
974 #define wxUSE_PRINTING_ARCHITECTURE 1
975
976 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
977 // much more.
978 //
979 // Default is 1.
980 //
981 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
982 // smaller library.
983 #define wxUSE_HTML 1
984
985 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
986 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
987 // set to 1. Note that for some compilers (notably Microsoft Visual C++) you
988 // will need to manually add opengl32.lib and glu32.lib to the list of
989 // libraries linked with your program if you use OpenGL.
990 //
991 // Default is 0.
992 //
993 // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
994 #define wxUSE_GLCANVAS 0
995
996 // wxRichTextCtrl allows editing of styled text.
997 //
998 // Default is 1.
999 //
1000 // Recommended setting: 1, set to 0 if you want compile a
1001 // smaller library.
1002 #define wxUSE_RICHTEXT 1
1003
1004 // ----------------------------------------------------------------------------
1005 // Data transfer
1006 // ----------------------------------------------------------------------------
1007
1008 // Use wxClipboard class for clipboard copy/paste.
1009 //
1010 // Default is 1.
1011 //
1012 // Recommended setting: 1
1013 #define wxUSE_CLIPBOARD 1
1014
1015 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1016 // drop
1017 //
1018 // Default is 1.
1019 //
1020 // Recommended setting: 1
1021 #define wxUSE_DATAOBJ 1
1022
1023 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
1024 // different from "built in" drag and drop in wxTreeCtrl which is always
1025 // available). Requires wxUSE_DATAOBJ.
1026 //
1027 // Default is 1.
1028 //
1029 // Recommended setting: 1
1030 #define wxUSE_DRAG_AND_DROP 1
1031
1032 // Use wxAccessible for enhanced and customisable accessibility.
1033 // Depends on wxUSE_OLE.
1034 //
1035 // Default is 0.
1036 //
1037 // Recommended setting (at present): 0
1038 #define wxUSE_ACCESSIBILITY 0
1039
1040 // ----------------------------------------------------------------------------
1041 // miscellaneous settings
1042 // ----------------------------------------------------------------------------
1043
1044 // wxSingleInstanceChecker class allows to verify at startup if another program
1045 // instance is running.
1046 //
1047 // Default is 1
1048 //
1049 // Recommended setting: 1 (the class is tiny, disabling it won't save much
1050 // space)
1051 #define wxUSE_SNGLINST_CHECKER 1
1052
1053 #define wxUSE_DRAGIMAGE 1
1054
1055 #define wxUSE_IPC 1
1056 // 0 for no interprocess comms
1057 #define wxUSE_HELP 1
1058 // 0 for no help facility
1059
1060 // Should we use MS HTML help for wxHelpController? If disabled, neither
1061 // wxCHMHelpController nor wxBestHelpController are available.
1062 //
1063 // Default is 1 under MSW, 0 is always used for the other platforms.
1064 //
1065 // Recommended setting: 1, only set to 0 if you have trouble compiling
1066 // wxCHMHelpController (could be a problem with really ancient compilers)
1067 #define wxUSE_MS_HTML_HELP 1
1068
1069
1070 // Use wxHTML-based help controller?
1071 #define wxUSE_WXHTML_HELP 1
1072
1073 #define wxUSE_RESOURCES 0
1074 // 0 for no wxGetResource/wxWriteResource
1075 #define wxUSE_CONSTRAINTS 0
1076 // 0 for no window layout constraint system
1077
1078 #define wxUSE_SPLINES 1
1079 // 0 for no splines
1080
1081 #define wxUSE_MOUSEWHEEL 1
1082 // Include mouse wheel support
1083
1084 // ----------------------------------------------------------------------------
1085 // postscript support settings
1086 // ----------------------------------------------------------------------------
1087
1088 // Set to 1 for PostScript device context.
1089 #define wxUSE_POSTSCRIPT 0
1090
1091 // Set to 1 to use font metric files in GetTextExtent
1092 #define wxUSE_AFM_FOR_POSTSCRIPT 1
1093
1094 // ----------------------------------------------------------------------------
1095 // database classes
1096 // ----------------------------------------------------------------------------
1097
1098 // Define 1 to use ODBC classes
1099 #define wxUSE_ODBC 0
1100
1101 // For backward compatibility reasons, this parameter now only controls the
1102 // default scrolling method used by cursors. This default behavior can be
1103 // overriden by setting the second param of wxDB::wxDbGetConnection() or
1104 // wxDb() constructor to indicate whether the connection (and any wxDbTable()s
1105 // that use the connection) should support forward only scrolling of cursors,
1106 // or both forward and backward support for backward scrolling cursors is
1107 // dependent on the data source as well as the ODBC driver being used.
1108 #define wxODBC_FWD_ONLY_CURSORS 1
1109
1110 // Default is 0. Set to 1 to use the deprecated classes, enum types, function,
1111 // member variables. With a setting of 1, full backward compatibility with the
1112 // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
1113 // as future development will be done only on the non-deprecated
1114 // functions/classes/member variables/etc.
1115 #define wxODBC_BACKWARD_COMPATABILITY 0
1116
1117 // ----------------------------------------------------------------------------
1118 // other compiler (mis)features
1119 // ----------------------------------------------------------------------------
1120
1121 // Set this to 0 if your compiler can't cope with omission of prototype
1122 // parameters.
1123 //
1124 // Default is 1.
1125 //
1126 // Recommended setting: 1 (should never need to set this to 0)
1127 #define REMOVE_UNUSED_ARG 1
1128
1129 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
1130 // them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
1131 // and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
1132 // used anyhow.
1133 //
1134 // Default is 1.
1135 //
1136 // Recommended setting: whatever your compiler likes more
1137 #define wxUSE_IOSTREAMH 1
1138
1139 // ----------------------------------------------------------------------------
1140 // image format support
1141 // ----------------------------------------------------------------------------
1142
1143 // wxImage supports many different image formats which can be configured at
1144 // compile-time. BMP is always supported, others are optional and can be safely
1145 // disabled if you don't plan to use images in such format sometimes saving
1146 // substantial amount of code in the final library.
1147 //
1148 // Some formats require an extra library which is included in wxWin sources
1149 // which is mentioned if it is the case.
1150
1151 // Set to 1 for wxImage support (recommended).
1152 #define wxUSE_IMAGE 1
1153
1154 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1155 #define wxUSE_LIBPNG 1
1156
1157 // Set to 1 for JPEG format support (requires libjpeg)
1158 #define wxUSE_LIBJPEG 1
1159
1160 // Set to 1 for TIFF format support (requires libtiff)
1161 #define wxUSE_LIBTIFF 0
1162
1163 // Set to 1 for TGA format support (loading only)
1164 #define wxUSE_TGA 1
1165
1166 // Set to 1 for GIF format support
1167 #define wxUSE_GIF 0
1168
1169 // Set to 1 for PNM format support
1170 #define wxUSE_PNM 1
1171
1172 // Set to 1 for PCX format support
1173 #define wxUSE_PCX 0
1174
1175 // Set to 1 for IFF format support (Amiga format)
1176 #define wxUSE_IFF 0
1177
1178 // Set to 1 for XPM format support
1179 #define wxUSE_XPM 1
1180
1181 // Set to 1 for MS Icons and Cursors format support
1182 #define wxUSE_ICO_CUR 1
1183
1184 // Set to 1 to compile in wxPalette class
1185 #define wxUSE_PALETTE 1
1186
1187 // ----------------------------------------------------------------------------
1188 // wxUniversal-only options
1189 // ----------------------------------------------------------------------------
1190
1191 // Set to 1 to enable compilation of all themes, this is the default
1192 #define wxUSE_ALL_THEMES 1
1193
1194 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1195 // is unset, if it is set these options are not used; notice that metal theme
1196 // uses Win32 one
1197 #define wxUSE_THEME_GTK 0
1198 #define wxUSE_THEME_METAL 0
1199 #define wxUSE_THEME_MONO 0
1200 #define wxUSE_THEME_WIN32 0
1201
1202
1203 /* --- end common options --- */
1204
1205 // ----------------------------------------------------------------------------
1206 // Windows-only settings
1207 // ----------------------------------------------------------------------------
1208
1209 // Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
1210 // and want to run your programs under Windows 9x and not only NT/2000/XP.
1211 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
1212 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
1213 // that you will have to modify the makefiles to include unicows.lib import
1214 // library as the first library (see installation instructions in install.txt
1215 // to learn how to do it when building the library or samples).
1216 //
1217 // If your compiler doesn't have unicows.lib, you can get a version of it at
1218 // http://libunicows.sourceforge.net
1219 //
1220 // Default is 0
1221 //
1222 // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
1223 #ifndef wxUSE_UNICODE_MSLU
1224 #define wxUSE_UNICODE_MSLU 0
1225 #endif
1226
1227 // Set this to 1 if you want to use wxWidgets and MFC in the same program. This
1228 // will override some other settings (see below)
1229 //
1230 // Default is 0.
1231 //
1232 // Recommended setting: 0 unless you really have to use MFC
1233 #define wxUSE_MFC 0
1234
1235 // Set this to 1 for generic OLE support: this is required for drag-and-drop,
1236 // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1237 // can't compile/doesn't have the OLE headers.
1238 //
1239 // Default is 1.
1240 //
1241 // Recommended setting: 1
1242 #define wxUSE_OLE 1
1243
1244 // Set this to 1 to enable wxAutomationObject class.
1245 //
1246 // Default is 1.
1247 //
1248 // Recommended setting: 1 if you need to control other applications via OLE
1249 // Automation, can be safely set to 0 otherwise
1250 #define wxUSE_OLE_AUTOMATION 1
1251
1252 // Set this to 1 to enable wxActiveXContainer class allowing to embed OLE
1253 // controls in wx.
1254 //
1255 // Default is 1.
1256 //
1257 // Recommended setting: 1, required by wxMediaCtrl
1258 #define wxUSE_ACTIVEX 1
1259
1260 // wxDC cacheing implementation
1261 #define wxUSE_DC_CACHEING 1
1262
1263 // Set this to 1 to enable the use of DIB's for wxBitmap to support
1264 // bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
1265 #define wxUSE_DIB_FOR_BITMAP 0
1266
1267 // Set this to 1 to enable wxDIB class used internally for manipulating
1268 // wxBitmao data.
1269 //
1270 // Default is 1, set it to 0 only if you don't use wxImage neither
1271 //
1272 // Recommended setting: 1 (without it conversion to/from wxImage won't work)
1273 #define wxUSE_WXDIB 1
1274
1275 // Set to 0 to disable PostScript print/preview architecture code under Windows
1276 // (just use Windows printing).
1277 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1278
1279 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1280 // which allows to put more than ~32Kb of text in it even under Win9x (NT
1281 // doesn't have such limitation).
1282 //
1283 // Default is 1 for compilers which support it
1284 //
1285 // Recommended setting: 1, only set it to 0 if your compiler doesn't have
1286 // or can't compile <richedit.h>
1287 #define wxUSE_RICHEDIT 1
1288
1289 // Set this to 1 to use extra features of richedit v2 and later controls
1290 //
1291 // Default is 1 for compilers which support it
1292 //
1293 // Recommended setting: 1
1294 #define wxUSE_RICHEDIT2 1
1295
1296 // Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1297 // is required by wxUSE_CHECKLISTBOX.
1298 //
1299 // Default is 1.
1300 //
1301 // Recommended setting: 1, set to 0 for a small library size reduction
1302 #define wxUSE_OWNER_DRAWN 1
1303
1304 // Set to 1 to compile MS Windows XP theme engine support
1305 #define wxUSE_UXTHEME 1
1306
1307 // Set to 1 to auto-adapt to MS Windows XP themes where possible
1308 // (notably, wxNotebook pages)
1309 #define wxUSE_UXTHEME_AUTO 1
1310
1311 // Set to 1 to use InkEdit control (Tablet PC), if available
1312 #define wxUSE_INKEDIT 0
1313
1314 // ----------------------------------------------------------------------------
1315 // Generic versions of native controls
1316 // ----------------------------------------------------------------------------
1317
1318 // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
1319 // native wxDatePickerCtrl
1320 //
1321 // Default is 0.
1322 //
1323 // Recommended setting: 0, this is mainly used for testing
1324 #define wxUSE_DATEPICKCTRL_GENERIC 0
1325
1326 // ----------------------------------------------------------------------------
1327 // Crash debugging helpers
1328 // ----------------------------------------------------------------------------
1329
1330 // Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1331 // dumps of your program when it crashes (or at any other moment)
1332 //
1333 // Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1334 //
1335 // Recommended setting: 1, set to 0 if your programs never crash
1336 #define wxUSE_CRASHREPORT 1
1337
1338 // ----------------------------------------------------------------------------
1339 // obsolete settings
1340 // ----------------------------------------------------------------------------
1341
1342 // NB: all settings in this section are obsolete and should not be used/changed
1343 // at all, they will disappear
1344
1345 // Define 1 to use bitmap messages.
1346 #define wxUSE_BITMAP_MESSAGE 1
1347
1348 #endif // _WX_SETUP_H_
1349

  ViewVC Help
Powered by ViewVC 1.1.22