Annotation of /branch/debug/0.X/0.9.X/0.9.7/r3113/plugins/CDVDiso/src/missing

#! /bin/sh
# Common stub for a few missing GNU programs while installing.

scriptversion=2006-05-10.23

# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
#   Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
fi

run=:
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'

# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
  configure_ac=configure.ac
else
  configure_ac=configure.in
fi

msg="missing on your system"

case $1 in
--run)
  # Try to run requested program, and just exit if it succeeds.
  run=
  shift
  "$@" && exit 0
  # Exit code 63 means version mismatch.  This often happens
  # when the user try to use an ancient version of a tool on
  # a file that requires a minimum version.  In this case we
  # we should proceed has if the program had been absent, or
  # if --run hadn't been passed.
  if test $? = 63; then
    run=:
    msg="probably too old"
  fi
  ;;

  -h|--h|--he|--hel|--help)
    echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...

Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.

Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit
  --run           try to run the given command, and emulate it if it fails

Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  autom4te     touch the output file, or create a stub one
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  help2man     touch the output file
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  tar          try tar, gnutar, gtar, then tar without non-portable flags
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]

Send bug reports to <bug-automake@gnu.org>."
    exit $?
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing $scriptversion (GNU Automake)"
    exit $?
    ;;

  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;

esac

# Now exit if we have it, but it failed.  Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case $1 in
  lex|yacc)
    # Not GNU programs, they don't have --version.
    ;;

  tar)
    if test -n "$run"; then
       echo 1>&2 "ERROR: \`tar' requires --run"
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       exit 1
    fi
    ;;

  *)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       # Could not run --version or --help.  This is probably someone
       # running `$TOOL --version' or `$TOOL --help' to check whether
       # $TOOL exists and not knowing $TOOL uses missing.
       exit 1
    fi
    ;;
esac

# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case $1 in
  aclocal*)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;

  autoconf)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`${configure_ac}'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;

  autoheader)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case $f in
      *:*) touch_files="$touch_files "`echo "$f" |
				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;

  automake*)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
	   sed 's/\.am$/.in/' |
	   while read f; do touch "$f"; done
    ;;

  autom4te)
    echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
         You might have modified some files without having the
         proper tools for further handling them.
         You can get \`$1' as part of \`Autoconf' from any GNU
         archive site."

    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -f "$file"; then
	touch $file
    else
	test -z "$file" || exec >$file
	echo "#! /bin/sh"
	echo "# Created by GNU Automake missing as a replacement of"
	echo "#  $ $@"
	echo "exit 0"
	chmod +x $file
	exit 1
    fi
    ;;

  bison|yacc)
    echo 1>&2 "\
WARNING: \`$1' $msg.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if test $# -ne 1; then
        eval LASTARG="\${$#}"
	case $LASTARG in
	*.y)
	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
	    if test -f "$SRCFILE"; then
	         cp "$SRCFILE" y.tab.c
	    fi
	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
	    if test -f "$SRCFILE"; then
	         cp "$SRCFILE" y.tab.h
	    fi
	  ;;
	esac
    fi
    if test ! -f y.tab.h; then
	echo >y.tab.h
    fi
    if test ! -f y.tab.c; then
	echo 'main() { return 0; }' >y.tab.c
    fi
    ;;

  lex|flex)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if test $# -ne 1; then
        eval LASTARG="\${$#}"
	case $LASTARG in
	*.l)
	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
	    if test -f "$SRCFILE"; then
	         cp "$SRCFILE" lex.yy.c
	    fi
	  ;;
	esac
    fi
    if test ! -f lex.yy.c; then
	echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  help2man)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
	 you modified a dependency of a manual page.  You may need the
	 \`Help2man' package in order for those modifications to take
	 effect.  You can get \`Help2man' from any GNU archive site."

    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -f "$file"; then
	touch $file
    else
	test -z "$file" || exec >$file
	echo ".ab help2man is required to generate this page"
	exit 1
    fi
    ;;

  makeinfo)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    # The file to touch is that specified with -o ...
    file=`echo "$*" | sed -n "$sed_output"`
    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -z "$file"; then
      # ... or it is the one specified with @setfilename ...
      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '
	/^@setfilename/{
	  s/.* \([^ ]*\) *$/\1/
	  p
	  q
	}' $infile`
      # ... or it is derived from the source name (dir/f.texi becomes f.info)
      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
    fi
    # If the file does not exist, the user really needs makeinfo;
    # let's fail without touching anything.
    test -f $file || exit 1
    touch $file
    ;;

  tar)
    shift

    # We have already tried tar in the generic part.
    # Look for gnutar/gtar before invocation to avoid ugly error
    # messages.
    if (gnutar --version > /dev/null 2>&1); then
       gnutar "$@" && exit 0
    fi
    if (gtar --version > /dev/null 2>&1); then
       gtar "$@" && exit 0
    fi
    firstarg="$1"
    if shift; then
	case $firstarg in
	*o*)
	    firstarg=`echo "$firstarg" | sed s/o//`
	    tar "$firstarg" "$@" && exit 0
	    ;;
	esac
	case $firstarg in
	*h*)
	    firstarg=`echo "$firstarg" | sed s/h//`
	    tar "$firstarg" "$@" && exit 0
	    ;;
	esac
    fi

    echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
         You may want to install GNU tar or Free paxutils, or check the
         command line arguments."
    exit 1
    ;;

  *)
    echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
         You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequisites for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
esac

exit 0

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
1	william	31	#! /bin/sh
2			# Common stub for a few missing GNU programs while installing.
3
4			scriptversion=2006-05-10.23
5
6			# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
7			# Free Software Foundation, Inc.
8			# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
9
10			# This program is free software; you can redistribute it and/or modify
11			# it under the terms of the GNU General Public License as published by
12			# the Free Software Foundation; either version 2, or (at your option)
13			# any later version.
14
15			# This program is distributed in the hope that it will be useful,
16			# but WITHOUT ANY WARRANTY; without even the implied warranty of
17			# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18			# GNU General Public License for more details.
19
20			# You should have received a copy of the GNU General Public License
21			# along with this program; if not, write to the Free Software
22			# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23			# 02110-1301, USA.
24
25			# As a special exception to the GNU General Public License, if you
26			# distribute this file as part of a program that contains a
27			# configuration script generated by Autoconf, you may include it under
28			# the same distribution terms that you use for the rest of that program.
29
30			if test $# -eq 0; then
31			echo 1>&2 "Try \`$0 --help' for more information"
32			exit 1
33			fi
34
35			run=:
36			sed_output='s/.* --output[ =]\([^ ]\)./\1/p'
37			sed_minuso='s/.* -o \([^ ]\)./\1/p'
38
39			# In the cases where this matters, `missing' is being run in the
40			# srcdir already.
41			if test -f configure.ac; then
42			configure_ac=configure.ac
43			else
44			configure_ac=configure.in
45			fi
46
47			msg="missing on your system"
48
49			case $1 in
50			--run)
51			# Try to run requested program, and just exit if it succeeds.
52			run=
53			shift
54			"$@" && exit 0
55			# Exit code 63 means version mismatch. This often happens
56			# when the user try to use an ancient version of a tool on
57			# a file that requires a minimum version. In this case we
58			# we should proceed has if the program had been absent, or
59			# if --run hadn't been passed.
60			if test $? = 63; then
61			run=:
62			msg="probably too old"
63			fi
64			;;
65
66			-h\|--h\|--he\|--hel\|--help)
67			echo "\
68			$0 [OPTION]... PROGRAM [ARGUMENT]...
69
70			Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
71			error status if there is no known handling for PROGRAM.
72
73			Options:
74			-h, --help display this help and exit
75			-v, --version output version information and exit
76			--run try to run the given command, and emulate it if it fails
77
78			Supported PROGRAM values:
79			aclocal touch file \`aclocal.m4'
80			autoconf touch file \`configure'
81			autoheader touch file \`config.h.in'
82			autom4te touch the output file, or create a stub one
83			automake touch all \`Makefile.in' files
84			bison create \`y.tab.[ch]', if possible, from existing .[ch]
85			flex create \`lex.yy.c', if possible, from existing .c
86			help2man touch the output file
87			lex create \`lex.yy.c', if possible, from existing .c
88			makeinfo touch the output file
89			tar try tar, gnutar, gtar, then tar without non-portable flags
90			yacc create \`y.tab.[ch]', if possible, from existing .[ch]
91
92			Send bug reports to <bug-automake@gnu.org>."
93			exit $?
94			;;
95
96			-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
97			echo "missing $scriptversion (GNU Automake)"
98			exit $?
99			;;
100
101			-*)
102			echo 1>&2 "$0: Unknown \`$1' option"
103			echo 1>&2 "Try \`$0 --help' for more information"
104			exit 1
105			;;
106
107			esac
108
109			# Now exit if we have it, but it failed. Also exit now if we
110			# don't have it and --version was passed (most likely to detect
111			# the program).
112			case $1 in
113			lex\|yacc)
114			# Not GNU programs, they don't have --version.
115			;;
116
117			tar)
118			if test -n "$run"; then
119			echo 1>&2 "ERROR: \`tar' requires --run"
120			exit 1
121			elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
122			exit 1
123			fi
124			;;
125
126			*)
127			if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
128			# We have it, but it failed.
129			exit 1
130			elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
131			# Could not run --version or --help. This is probably someone
132			# running `$TOOL --version' or `$TOOL --help' to check whether
133			# $TOOL exists and not knowing $TOOL uses missing.
134			exit 1
135			fi
136			;;
137			esac
138
139			# If it does not exist, or fails to run (possibly an outdated version),
140			# try to emulate it.
141			case $1 in
142			aclocal*)
143			echo 1>&2 "\
144			WARNING: \`$1' is $msg. You should only need it if
145			you modified \`acinclude.m4' or \`${configure_ac}'. You might want
146			to install the \`Automake' and \`Perl' packages. Grab them from
147			any GNU archive site."
148			touch aclocal.m4
149			;;
150
151			autoconf)
152			echo 1>&2 "\
153			WARNING: \`$1' is $msg. You should only need it if
154			you modified \`${configure_ac}'. You might want to install the
155			\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
156			archive site."
157			touch configure
158			;;
159
160			autoheader)
161			echo 1>&2 "\
162			WARNING: \`$1' is $msg. You should only need it if
163			you modified \`acconfig.h' or \`${configure_ac}'. You might want
164			to install the \`Autoconf' and \`GNU m4' packages. Grab them
165			from any GNU archive site."
166			files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' ${configure_ac}`
167			test -z "$files" && files="config.h"
168			touch_files=
169			for f in $files; do
170			case $f in
171			:) touch_files="$touch_files "`echo "$f" \|
172			sed -e 's/^[^:]://' -e 's/:.//'`;;
173			*) touch_files="$touch_files $f.in";;
174			esac
175			done
176			touch $touch_files
177			;;
178
179			automake*)
180			echo 1>&2 "\
181			WARNING: \`$1' is $msg. You should only need it if
182			you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
183			You might want to install the \`Automake' and \`Perl' packages.
184			Grab them from any GNU archive site."
185			find . -type f -name Makefile.am -print \|
186			sed 's/\.am$/.in/' \|
187			while read f; do touch "$f"; done
188			;;
189
190			autom4te)
191			echo 1>&2 "\
192			WARNING: \`$1' is needed, but is $msg.
193			You might have modified some files without having the
194			proper tools for further handling them.
195			You can get \`$1' as part of \`Autoconf' from any GNU
196			archive site."
197
198			file=`echo "$*" \| sed -n "$sed_output"`
199			test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
200			if test -f "$file"; then
201			touch $file
202			else
203			test -z "$file" \|\| exec >$file
204			echo "#! /bin/sh"
205			echo "# Created by GNU Automake missing as a replacement of"
206			echo "# $ $@"
207			echo "exit 0"
208			chmod +x $file
209			exit 1
210			fi
211			;;
212
213			bison\|yacc)
214			echo 1>&2 "\
215			WARNING: \`$1' $msg. You should only need it if
216			you modified a \`.y' file. You may need the \`Bison' package
217			in order for those modifications to take effect. You can get
218			\`Bison' from any GNU archive site."
219			rm -f y.tab.c y.tab.h
220			if test $# -ne 1; then
221			eval LASTARG="\${$#}"
222			case $LASTARG in
223			*.y)
224			SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
225			if test -f "$SRCFILE"; then
226			cp "$SRCFILE" y.tab.c
227			fi
228			SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
229			if test -f "$SRCFILE"; then
230			cp "$SRCFILE" y.tab.h
231			fi
232			;;
233			esac
234			fi
235			if test ! -f y.tab.h; then
236			echo >y.tab.h
237			fi
238			if test ! -f y.tab.c; then
239			echo 'main() { return 0; }' >y.tab.c
240			fi
241			;;
242
243			lex\|flex)
244			echo 1>&2 "\
245			WARNING: \`$1' is $msg. You should only need it if
246			you modified a \`.l' file. You may need the \`Flex' package
247			in order for those modifications to take effect. You can get
248			\`Flex' from any GNU archive site."
249			rm -f lex.yy.c
250			if test $# -ne 1; then
251			eval LASTARG="\${$#}"
252			case $LASTARG in
253			*.l)
254			SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
255			if test -f "$SRCFILE"; then
256			cp "$SRCFILE" lex.yy.c
257			fi
258			;;
259			esac
260			fi
261			if test ! -f lex.yy.c; then
262			echo 'main() { return 0; }' >lex.yy.c
263			fi
264			;;
265
266			help2man)
267			echo 1>&2 "\
268			WARNING: \`$1' is $msg. You should only need it if
269			you modified a dependency of a manual page. You may need the
270			\`Help2man' package in order for those modifications to take
271			effect. You can get \`Help2man' from any GNU archive site."
272
273			file=`echo "$*" \| sed -n "$sed_output"`
274			test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
275			if test -f "$file"; then
276			touch $file
277			else
278			test -z "$file" \|\| exec >$file
279			echo ".ab help2man is required to generate this page"
280			exit 1
281			fi
282			;;
283
284			makeinfo)
285			echo 1>&2 "\
286			WARNING: \`$1' is $msg. You should only need it if
287			you modified a \`.texi' or \`.texinfo' file, or any other file
288			indirectly affecting the aspect of the manual. The spurious
289			call might also be the consequence of using a buggy \`make' (AIX,
290			DU, IRIX). You might want to install the \`Texinfo' package or
291			the \`GNU make' package. Grab either from any GNU archive site."
292			# The file to touch is that specified with -o ...
293			file=`echo "$*" \| sed -n "$sed_output"`
294			test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
295			if test -z "$file"; then
296			# ... or it is the one specified with @setfilename ...
297			infile=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
298			file=`sed -n '
299			/^@setfilename/{
300			s/.* \([^ ]\) $/\1/
301			p
302			q
303			}' $infile`
304			# ... or it is derived from the source name (dir/f.texi becomes f.info)
305			test -z "$file" && file=`echo "$infile" \| sed 's,./,,;s,.[^.]$,,'`.info
306			fi
307			# If the file does not exist, the user really needs makeinfo;
308			# let's fail without touching anything.
309			test -f $file \|\| exit 1
310			touch $file
311			;;
312
313			tar)
314			shift
315
316			# We have already tried tar in the generic part.
317			# Look for gnutar/gtar before invocation to avoid ugly error
318			# messages.
319			if (gnutar --version > /dev/null 2>&1); then
320			gnutar "$@" && exit 0
321			fi
322			if (gtar --version > /dev/null 2>&1); then
323			gtar "$@" && exit 0
324			fi
325			firstarg="$1"
326			if shift; then
327			case $firstarg in
328			o)
329			firstarg=`echo "$firstarg" \| sed s/o//`
330			tar "$firstarg" "$@" && exit 0
331			;;
332			esac
333			case $firstarg in
334			h)
335			firstarg=`echo "$firstarg" \| sed s/h//`
336			tar "$firstarg" "$@" && exit 0
337			;;
338			esac
339			fi
340
341			echo 1>&2 "\
342			WARNING: I can't seem to be able to run \`tar' with the given arguments.
343			You may want to install GNU tar or Free paxutils, or check the
344			command line arguments."
345			exit 1
346			;;
347
348			*)
349			echo 1>&2 "\
350			WARNING: \`$1' is needed, and is $msg.
351			You might have modified some files without having the
352			proper tools for further handling them. Check the \`README' file,
353			it often tells you about the needed prerequisites for installing
354			this package. You may also peek at any GNU archive site, in case
355			some other package would contain this missing \`$1' program."
356			exit 1
357			;;
358			esac
359
360			exit 0
361
362			# Local variables:
363			# eval: (add-hook 'write-file-hooks 'time-stamp)
364			# time-stamp-start: "scriptversion="
365			# time-stamp-format: "%:y-%02m-%02d.%02H"
366			# time-stamp-end: "$"
367			# End: